TREE SERVICES

TREE PRUNING

TREE PRUNINGEach tree will be individually considered in relation to the shape, size, character, condition, site and species of tree. All operations will be completed leaving each tree in an acceptable, well-balanced and safe condition.
Each branch will be removed using the ABC cut method where risk of tearing is reduced. All final cuts will be made at the branch collar, with the branch collar remaining intact. Under no circumstances will any flush cuts be made.

TREE FELLING

TREE FELLINGThe complete removal of a tree to ground level is carried out either when a tree is dead, dying or diseased, or when it is no longer wanted. The tree will either be felled in one, or in sections, depending on the surrounding area.

CROWN REDUCTION

Crown Reduction The reduction of a tree is necessary when the tree has outgrown its environment. A tree can be reduced by anything up to 50%, but the usual amount is 30%. When a tree is reduced the original shape of the tree should be maintained even after pruning.

POLLARDING

POLLARDINGThe pollarding of a tree is the most drastic form of pruning, but for some species (such as poplar or willow) in the wrong environment, this form of pruning is essential.

CROWN LIFT

Crown Lift The crown lift is necessary when branches hang down too low. The lower branches will be removed to raise the bottom of the tree canopy to anything from 0-5.2m. This allows more light to pass under the crown and prevents obstruction from low branches.

TREE THINNING

IMG_4775The Thinning of a tree is necessary when the crown has become too dense. The tree will be thinned to minimise the weight of the crown and allow the wind to pass through more easily or to encourage light to penetrate the crown.

DEAD WOODING

DEAD WOODINGAs the name suggests this procedure is carried out when dead or diseased wood needs removing from the crown of the tree.

HEDGE TRIMMING

HEDGE TRIMMING Hedges can be trimmed or pruned to any size. Depending on the current size of the hedge, chain saws, hedge trimmers or secateurs may be used.

STUMP REMOVAL

STUMP REMOVAL Stump removal consists of the complete removal of the stump and any lateral roots of the tree and may be undertaken either using hand tools or a machine (stump grinder). Stump grinding involves the removal of stump to a specified depth, generally between 150m and 300m. Upon completion of stump removal, the remaining hole will be back-filled with soil or grinding waste to leave a level surface.

TREE PLANTING

TREE PLANTINGA hole will be dug that is bigger than the root ball. The tree will be planted into the hole and then backfilled with soil. (When backfilling, the nursery mark of the tree will not be submerged below the soil.) The tree may be staked if necessary. Mulch will be added to the tree pit to minimise water loss and prevent weed growth.

LOGS FOR SALE

LOGS FOR SALEWe only use the best burning Seasonal Logs From, Ash Wood to The great Mighty Oak Wood To Prevent your Fire From Smoking. Unlike some woods Such as Conifers are most common to smoke out your Fire.

 

 

 

 

 

 
LANDSCAPING SERVICES

TURFING

TURFINGNew Turf laid in a Professional manner using Top Quality Turf and Soil.

FENCING

FENCINGAll Types of New Fencing Supplied and Fitted From Small Repairs, Wooden Posts & Concrete Posts.

PATIOS

Patios New Patios and Paths Layed with your design and your chosen stone. And We Also Clean Dirty Patios due to Moss & Dirt.

GARDEN SHEDS

GARDEN SHEDSNew Garden Sheds Supplied and Fitted with your chosen Shed Including Shed Treatment or Stainer if Needed.

DECKING

DECKINGWooden Decking Supplied and Fitted in any area chosen where needed.

GATES

GATESMetal or wooden gates fitted in Front of your Property.

GARDEN PONDS

garden-pondsAll Different Types of Garden Ponds can be designed From Small Basic Ponds with Rockery or Bigger Ponds with other designs, This also Depends on the Size of your Fish you will have in the pond or not.